Pure Sine Wave Inverter For Wind Solar System 1000W 48V

Pure Sine Wave Inverter For Wind Solar System 1000W 48V,Output Frequency 50Hz/60Hz,Maximum efficiency >90%,Power factor >99%

1.Performance Specification of Intelligent inverter1.The inverter is designed by our company independently; it's controlled by CPU, high quality and modify sine wave intelligent inverter2.Our product is used for the many kinds of the single phase equipments, example: motor, screw tools,tube light etc.family equipments, and also it can be used for the industry and communication equipments.3.Single key intelligent switching, easy to operated4.Output short circuit protection (when the inverter is working on battery mode): when there is short circuit, the inverter will indicate it and the machine will shut down automatically.5.Overload protection: when there is overload, the machine will prompt you and protect the inverter from being damaged automatically. Over 100%-120%, inverter shuts down 30s later, over 150%, inverter shuts down at once.6.Internal circuit can protect the battery .when the battery voltage is under the 15% level,the inverter will be shut down at once.

Warnning :A.If not allowed by our company, this device can't supply power for the equipments which maintain the life B.This products is designed to supply the reserve inverted power for the home electric appliances, so it's not fit for the precision equipmentsC.If it is used for the computer, the computer must have a enough power inside. Or the computer maybe is restarted, when the city power is interrupted.2. Use range of Intelligent inverterit can be used for t family equipments, and also the industry and communication equipments.3. Installation Guides for inverter (1)1000W power output and the following connections using the form of Multi-outlet, DC input lead straight out of the use of connected(2)1000W power output over using the form of Multi-outlet and output terminal block , DC input terminal station used to connect(3)Multi-outlet can load less than 10A220VAC equipments.4 Inverter Technical Specifications

Model		SN-0.5K24V-220Z	SN-1K48V-220Z	SN-1.5K48V-220Z	SN-2K48V-220Z
Output Power	Power	500W	1000W	1500W	2000W
DC voltage	Maximum rated power (VA)	550VA	1100VA	1650VA	2200VA
	Range of input(VDC)	21-28V	42-58V	42-58V	42-58V
	Rated voltage of chargeable battery	24V	48V	48V	48V
Output Power	Rated Output Power (W)	500W	1000W	1500W	2000W
	Output Frequency(Hz)	50Hz/60Hz
	Output rated current(A)	2.3A	4.6A	6.8A	9A
	Inverter output voltage(V)	220V/110V
	(THD)	THD<3%
	Maximum rated power(W)	550W	1100W	1650W	2200W
	Maximum efficiency	>90%
	Power factor	>99%
	Input reverse polarity protection	positive electrode series insurance burned
	fuse specifications	25A*2
	Low - voltage alarm	Input voltage drops below the set limits, the indicator light flashing alarm and turn off the inverter
	Hight- voltage alarm	Input voltage is higher than the set limits, lights flashing alarm input voltage higher than the set limits, lights flashing alarm
	Voltage protection	The input voltage is above or below the set limits the inverter will stop work
	overload protecting	20% of the load exceeds the rated load, the inverter is turned off
	short circuit protecting	Inverter when the output short circuit shut down the system automatically restart in one minute, three failed to start, then shut down the system, need to re-open the power switch
	Over Temperature	Temperature exceeds 70 ° C is automatically enabled cooling fan, more than 80 °C to turn off the inverter system. Temperature is below 60 °C automatically restart
Fault information	load faults	Red light alarm LCD display specific fault information

4Mains input

Power	500W	\1000W	1500W	2000W
Mains input voltage	110V/220V
Input Frequency(MHz)	60HZ/50HZ
Mains input current	2.3A	4.6A	6.8A	9A
Transfer time	10ms

5. Environment and safety

Isolate Level(DC/AC)	1500V/1minute
Operating temperature	-20°C~+45°C
Transport/storage temperature	-20°C~+75°C
Operating humidity	0~95%R.H.
Operating altitude	3000m
Protection grade	IP22
Safety	LVD EN60950-1
Safety	≤10ms
Interface	RS232
Quality certification	CE